Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
system_administration:manual_installation:4_atmega2560 [2020/07/26 18:44]
franzunix [d-diot images v.1.4 and above]
system_administration:manual_installation:4_atmega2560 [2020/07/26 18:55] (current)
franzunix [Arduino-mk]
Line 155: Line 155:
 pi@d-diot:~ $ nano /​home/​pi/​atmega2560/​arduino-mk/​Makefile pi@d-diot:~ $ nano /​home/​pi/​atmega2560/​arduino-mk/​Makefile
 </​cli>​ </​cli>​
 +
 +==== d-diot images below v.1.3 ====
 +
 Add the following lines: Add the following lines:
 <file text /​home/​pi/​atmega2560/​arduino-mk/​Makefile>​ <file text /​home/​pi/​atmega2560/​arduino-mk/​Makefile>​
Line 164: Line 167:
 </​file>​ </​file>​
 Exit (CTRL+x) and save the changes (y).  Exit (CTRL+x) and save the changes (y). 
 +
 +==== d-diot image v.1.4 and above ====
 +
 +Add the following lines:
 +<file text /​home/​pi/​atmega2560/​arduino-mk/​Makefile>​
 +ARDUINO_DIR = /​usr/​share/​arduino
 +BOARD_TAG ​   = mega2560
 +ARDUINO_PORT = /​dev/​ttyAMA1
 +ARDUINO_LIBS = 
 +include /​usr/​share/​arduino/​Arduino.mk
 +</​file>​
 +Exit (CTRL+x) and save the changes (y). 
 +
 +==== test ====
  
 Create an empty arduino sketch to test arduino-mk: Create an empty arduino sketch to test arduino-mk:
  • system_administration/manual_installation/4_atmega2560.txt
  • Last modified: 2020/07/26 18:55
  • by franzunix