Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
hardware:pcb:mysensors:mini-bt-pcb-328p [2020/02/09 19:30]
franzunix [Board v.2.0]
hardware:pcb:mysensors:mini-bt-pcb-328p [2020/02/09 19:32] (current)
franzunix [Board v.2.0]
Line 50: Line 50:
 In the board v.2.0 a solder jumper (JP5) has been added. When shorted, this jumper connects the plus terminal of the batteries to the analog pin A7 of the MCU, so that the battery level can be estimated also if the MCU is powered through the boost converter. In the board v.2.0 a solder jumper (JP5) has been added. When shorted, this jumper connects the plus terminal of the batteries to the analog pin A7 of the MCU, so that the battery level can be estimated also if the MCU is powered through the boost converter.
  
-For the board v.1.0 the same result can be obtained connecting the A7 pin of the J1 connector with the Vbatt pin of the jumper JP1.  +<alert type="​success"​ icon="​glyphicon glyphicon-info-sign"​ dismiss="​false">​  
 +For the board v.1.0 the same result can be obtained connecting the A7 pin of the J1 connector with the Vbatt pin of the jumper JP1.  
 +</​alert> ​
  
 Click the button below to download the complete set (zip) of gerber files necessary for the manufacturing of the board v.1.0. Click the button below to download the complete set (zip) of gerber files necessary for the manufacturing of the board v.1.0.
  • hardware/pcb/mysensors/mini-bt-pcb-328p.txt
  • Last modified: 2020/02/09 19:32
  • by franzunix