### d.diot settings

# Enable serial (uart1 = mainmcu, uart3 = RFLink, uart 5 = MySensors NRF24)
enable_uart=1
dtoverlay=uart3
dtoverlay=uart5

# Enable spi0 for MySensors RFM69 radio module and set the cs pins (GPIO pin 8 and 7 = PIN 24 and PIN 26)
dtoverlay=spi0-cs,cs0_pin=8,cs1_pin=7

# Enable shutdown pin (GPIO pin 16 = PIN 36)
dtoverlay=gpio-shutdown,gpio_pin=16,active_low=1,gpio_pull="up"

# Enable poweroff pin (GPIO pin 6 = PIN 31)
dtoverlay=gpio-poweroff,gpiopin=6

# Enable lirc-rpi and set IN and OUT pins (GPIO pin 22 and 26 = PIN 15 and PIN 37)
dtoverlay=gpio-ir,gpio_pin=22
dtoverlay=gpio-ir-tx,gpio_pin=26